What’s the Ideal Water Pressure Rating for Your Home?

We often don’t think about our home’s water pressure until we’re in the middle of a shower and the stream suddenly becomes a trickle or when we can’t get enough water from the kitchen sink to wash dishes. Though water pressure is something we rarely ponder, it’s essential to maintain the ideal water pressure rating to ensure our plumbing system functions efficiently and to avoid potential damage. This blog will help you understand everything you need to know about your home’s water pressure, including what the ideal rating is and how to maintain it.

The Ideal Water Pressure Rating for Homes

The ideal water pressure rating for a home typically ranges between 60 psi (pounds per square inch) and 80 psi. If your home’s water pressure is within this range, you should experience a strong and steady flow of water from all fixtures. However, anything above 80 psi is considered high water pressure and can put strain on your plumbing system, leading to leaks, burst pipes, and increased wear and tear on appliances. On the flip side, low water pressure can make simple tasks like showering, washing dishes, or running multiple appliances at once frustratingly difficult.

How to Test Your Home’s Water Pressure

How do you know how high (or low) your home’s water pressure is? The good news is that finding this figure is quite simple. Here’s a step-by-step guide to testing the water pressure in your home:

• Get a Water Pressure Gauge: You can purchase a water pressure gauge at most hardware stores. This handy device attaches to a hose bib or faucet to provide a water pressure reading.
• Turn Off All Water-Consuming Appliances: Before testing, make sure to turn off any appliances that use water, such as dishwashers, washing machines, and sprinklers. This ensures an accurate reading.
• Attach the Gauge: Screw the water pressure gauge onto an outside hose bib or laundry tub faucet. Make sure it’s tight enough to prevent leaks.
• Open the Faucet Fully: Turn the faucet all the way on and check the gauge. The dial will indicate the water pressure in psi. Ideally, you want a reading between 60 psi and 80 psi.

If your water pressure reading is outside this range, you may need to adjust your pressure regulator or consult a professional plumber.

How to Maintain Your Home’s Water Pressure

Maintaining proper water pressure in your home involves regular checks and adjustments to ensure everything is functioning correctly. We recommend taking the following steps based on whether your water pressure is too low or too high:

• For low water pressure: If your reading is below 40 psi, there could be an issue with your main water supply, a blockage within your plumbing system, or sediment buildup in your water heater. It’s best to consult a professional plumber to diagnose the problem and provide an accurate solution rather than making guesses in the dark and risking extensive damage.
• For high water pressure: If your reading is above 80 psi, you can install a pressure regulator. This device is connected to your main water supply line and helps regulate the incoming pressure to a safer level for your home’s plumbing.

Feeling Under Pressure? Call Our Plumbers for Help Today!

If you’re experiencing issues with your water pressure or need help installing a pressure regulator, the experts at Superior Plumbing & Drains are here to help. Our team of skilled professionals can ensure your plumbing system is operating at its best and keep your water pressure within the ideal range to prevent damage. Contact our plumbers today to schedule a plumbing repair, a water jetting service, or a water heater service in Charlotte, NC, or one of the neighboring communities.